Reset my Tracker and Verify Power to Device

Instructions for Battery-Powered Trackers
(Applies to Barra GPS, Barra Edge, Oyster3, and Yabby models)

Please ensure you are outside with a clear view of the sky before beginning.

For assistance with battery replacement or to confirm the correct battery type, please visit: [Replacing Batteries]

Steps:

1. Open the back cover of the tracker.

2. Remove the batteries for at least 60 seconds.

3. Reinsert the batteries into the tracker.

4. A red light should begin flashing once the batteries are reinserted.

• If no red light appears, replace the batteries with a new set.

5. After approximately 5 minutes, the tracker will report its location in the app.

6. If the tracker does not report after 5 minutes, repeat steps 2–5 with fresh batteries.

If you have any additional questions, please contact a Lonestar Tracking Technician:
? 877-777-8636
? support@lonestartracking.com