Supplies Needed:
Phillips Head Screw Driver
Batteries Needed = Energizer Ultimate Lithium
| Tracker | Quantity | Type |
| Oyster3 | 3 | AA Energizer Ultimate Lithium |
| Barra GPS | 2 | AA Energizer Ultimate Lithium |
| Barra Edge | 2 | AA Energizer ultimate Lithium |
| Yabby GPS | 3 | AAA Energizer Ultimate Lithium |
| Yabby LGD | 3 | AAA Energizer Ultimate Lithium |
| Yabby Edge | 3 | AAA Energizer Ultimate Lithium |
Intro:
Step 1: Open up your tracker. One side will have your batteries and motherboard.
Step 2: Ensure you are outside with clear view of the sky.
Step 3: Remove Batteries as video shows.
Important Note: All batteries need to be removed from tracker for 60 seconds before new batteries are put in.
Video Link: Lonestar Tracking - How to Replace Batteries
Step 4: Leave tracker outside up to 24hrs.
After all steps have been followed the tracker will report.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article